Hardigg Cases from caselady.com

		Download Literature \| Stock Room
		CASELADY.COM (888) 274-4141


	All customized containers include an array of world-class features that make Hardigg the case industry leader, such as the patented Hardigg Comfort Grip Handles, positive anti-shear locks, recessed latches and hinges, 15-20% extra thickness in edges and corners, and a set of molded-in inserts that provide strength, adaptability, and reliability of attached hardware.

Hardigg Cases

FROM QUALITY TO PERFECTION
All Hardigg rotomolded cases – whether they’ll be used for commercial, industrial, or military transit, embody the utmost in engineered quality:

Lightweight

Heavy-Duty

Extreme Durability

Low Maintenance and Lifecycle Costs

Air-Tight, Water-Tight, Sand-Proof, and Dust-Proof Options

High-Impact Polyethylene Shell Construction

Wide Range of Standard Sizes. Colors, and Options

Case Features

	Supreme-quality rotational molding process. Rotomolded cases are really the only way to go if you want the best in transport protection and life expectancy for your container. And since we make the one-piece stress-free molded lids and bases in our own factory, there’s never any question about quality.
	Reinforced corners and edges. These high-stress areas are 15 to 20% thicker than the walls, to provide strength where it’s most needed.
	Permanent, uniform colors throughout walls. The color can’t be peeled off or scraped away because it is molded throughout.
	Molded-in corrugations. This design feature provides utmost columnar strength for stacking and protection during transport.
	Molded-in male/female stacking ribs. This feature allows you to stack numerous like-sized Hardigg cases easily and with confidence.
	Positive anti-shear locks. Our patented locks effectively prevent case lids from separating from bases on impact – plus they minimize stress on hardware.
	Low-profile wing-turn catches. These are both lightweight and high strength.
	Molded-in tongue-in-groove gasketed parting lines. The case seals tight, because the parting line is molded in. Even after an impact, the polyethylene shell will return to its original configuration without violating the seal.
	Recessed latches and hinges. This feature means your hardware is fully protected from impact or other damage.
	Molded-in metal inserts for catch and hinge attachment points. Hardigg’s patented metal inserts provide strength at the attachment points for the catches and latches and spread the load from the hardware to the container wall.
	Comfort Grip Handles. Patented heavy-duty plastic handles are standard on most cases. These injection-molded polyethylene handles are the industry’s easiest to grasp: they feature a larger and more comfortable grip and rustproof HDPE, plus they’re recyclable and weigh 33% less than other handles.
	Foam cushioning systems. For ultimate protection in equipment transit, Hardigg cases come in foam-lined, foam-filled, or customized cushioning models. We use polyethylene and polyurethane foams, depending upon your equipment weight/size and sensitivity.

Case Options
Hardigg offers an especially broad range of standard options.

Airtight case system - This includes a PRV (pressure relief valve) and gasketing hardware to safely maintain correct pressure differential.

All-catch - Case hinges are replaced with wing/turn catch-strike pairs, allowing lid to be completely removed. No charge for this option. [Note: some cases available only as all-catch.]

Card holder - Metal holder for shipping-card riveted to the exterior of case. Two sizes: 2-3/8" x 5-3/8" (60 x 136 mm) and 4" x 6" (102 x 152 mm).

Caster sets – removable or fixed. Available in sets of four, these are attached with rugged mounting hardware or with Hardigg’s FastClip™ mounting plate system.

Edge casters - These rugged caster assemblies are installed along a bottom edge of a single lid case to permit wheeled movement of the case in a cart-like fashion. Each heavy-duty caster wheel is in a durable cast aluminum housing uniquely designed to resist impact and rough handling abuse. Not available on all case sizes.

Foam cushioning - Hardigg cushioning systems are available in polyethylene (firmer) and polyurethane (softer) foams. Antistatic versions are also available. We offer foam-filled (with separate layers of 1" or 2" foam) and foam-lined (either 1" or 2" depth) systems. In addition, Hardigg will customize foam cushioning systems, with multiple cavities, to provide maximum protection and stability. Hardigg’s state-of-the-art water jet foam cutting system provides customers with precisely manufactured and repeatable cushions – plus fast turnaround.

Forklift provisions/Skid-Runners - The one-piece molded Skid-Runners provide clearance for forklift tines and pallet jacks.

Handles – Our patented, heavy-duty Hardigg Comfort Grip Handles are the industry’s easiest to hold. These polyethylene molded handles are available in two sizes – the Model 75, which is rated to 75 lbs. per handle, and the Model 150, which is rated to 150 lbs. Model 150 has a 90° stop, while the Model 75 has a non-integral stop. Extra 90°-stop metal handles are also available, mounted to your request. These are available in zinc-plate yellow-chromate or stainless steel.

Humidity indicator - Indicates 20%, 30%, and 40% relative humidity ranges. Three part face changes color when inside humidity exceeds the indicated level. As humidity decreases, the indicator resets for future use. Recommended for airtight cases only.

ID plates - I.A.W. MIL-P-15024, Type H, Style IV, Size 10.4" x 4" x .020" (102 x 102 x 0.5 mm) thick aluminum, fastener attached to your case. Text font is News Gothic Bold.

Labels – ATA. Standard ATA container label set complies with Specification 300 Category 1.

Labels – front. To assure that lids are replaced in the proper orientation. A set of two "front" labels are affixed to the case, one on the base and one on the lid, in the latchwells.

Labels – standard. Each label set includes: Delicate Unit, Handle with Care, and Up Arrows.

Lifting/tie-down rings - These welded rings provide hoisting and tie-down attachment points with 2" diameter clearance for hooks. They’re spring-loaded and pivot 180° . Available in plated steel or stainless steel.

Locking cable/hasp - Allows the case to be padlocked shut. Cable is tamper-resistant aircraft steel. [Padlock not included].

Reverse application - The orientation of the case is reversed: the lid becomes the base and vice versa. The lid has stacking indents instead of stacking ribs. No charge for this option.

Stainless hardware - Recommended for applications where the standard zinc-plate or zinc alloy finishes are unsuitable, such as excessive saltwater or chemical environments.

Stencil – epoxy or polyrollmark. Per MIL-I-43553. Available in black, white, and yellow, depending on the color of the case itself. One ink color per case.

Valve – fill - Supplied with an inner tube valve core, recommended for pressurization of case. Housing and cap are black anodized aluminum alloy. Recommended for use with Purge Valve option.

Valve – purge - Manual Pressure equalization or air relief. Recommended for use with the Fill Valve option.

Footlockers | Field Desks | Plasma Monitor Cases | Medical Cases

Connie Hill & Associates

Advanced Packaging Group LLC

Woman Owned, CCR Registered

Authorized GSA Distributor

Whatever your commercial, industrial, or military shipping needs may be, Hardigg has the right case to ensure that your equipment and materials arrive intact and ready to perform.